제품 정보로 건너뛰기
1 10

No.6

No.6 펄사 디스크 휠 | No6 휠

No.6 펄사 디스크 휠 | No6 휠

정가 $2,417.00 SGD
정가 할인가 $2,417.00 SGD
할인 품절
배송료는 결제 시 계산됩니다.
프리허브
수량

심장을 뛰게 하고 와트(동력)를 전달하기 위해 수작업으로 제작된 Pulsar Disc는 가능한 한 가벼운 무게로 타협할 수 없는 측면 강성을 제공합니다. 하지만 진정한 장점은? 시속 30km 이상으로 주행하면 No.6 그래픽이 속도에 맞춰 움직이며 당신을 응원하는 듯한 느낌을 줍니다.

깃털처럼 가볍고 탁월한 효율성을 자랑하며, 출발선에서 로켓처럼 튀어나가고 코너를 인상적인 속도로 빠져나갑니다. 25mm 내부 폭은 타이어를 안정적으로 유지하며, CeramicSpeed 베어링과 45T 래칫 체결 방식은 당신이 투입하는 모든 힘이 아스팔트에 직접 전달되도록 보장합니다. 와트 손실은 최소화하고, 웃음은 최대한 얻을 수 있습니다.

Pulsar Disc는 단순히 빠르게 달리는 것만이 아니라, 빠르게 달리는 동안에도 멋져 보이는 것을 의미합니다.

무게 925g – 940g
외부 폭 30mm
내부 폭 25mm

모든 휠은 UCI 승인을 받았습니다.
허브 베어링: 엔듀로

 기술 사양

목적 트라이애슬론 & 타임 트라이얼
프로필 외부 - 30mm
내부 - 25mm (후크형)
허브 제로 그래비티 v.2 45T 래칫 허브
베어링 CeramicSpeed 베어링
휠 무게 깃털처럼 가벼운 925g - 940g
재질 Toray T800 T1000
마감 UD 광택 페인트 없음
스루 액슬 타입 12 x 100 전면/ 12 x 142 후면
호환성 시마노 11/12단
SRAM XDR 
캄파놀로 N3W
권장 타이어 사이즈 28mm - 30mm에 최적화됨
최대 타이어 공기압 7.6 bar / 110 psi (타이어 권장 사항 확인)
튜블리스 레디
라이더 체중 제한 110kg

 

배송

현재 호주로는 배송 불가

Warranty

No.6 provides a 4-year limited warranty on all products, covering manufacturing and material defects for a period of 4 years from the original date of purchase, and applies to the original owner only.

What's Covered

The No.6 warranty covers manufacturing and material defects under normal riding conditions, including:

  • Carbon rim structure and integrity
  • Hub shell and internal mechanisms
  • Spokes and overall wheel build quality
  • Workmanship and assembly

Where a defect is confirmed, No.6 will repair or replace the affected component at our discretion.

Conditions & Limitations

The warranty does not cover:

  • Normal wear and service items, including rim tape, freehub components, ratchets, springs, bearings (pre 2026 models), and decals
  • Damage resulting from the use or installation of incompatible components
  • Improper installation, assembly, or setup
  • Misuse, neglect, or insufficient maintenance
  • Any form of product modification
  • Damage caused by impact, including sharp objects, torsion, compression, crashes, or abnormal forces beyond normal riding conditions
  • Tampering of bearings such as unauthorised changing of bearings/removing bearing cover voids bearing warranty

Warranty Validity

The warranty will not apply if:

  • The product has been modified or repaired by anyone other than an authorised No.6 representative
  • Unauthorised or non-approved spare parts have been used
  • The product serial number has been removed, altered, or made illegible
  • The product was provided under sponsorship or special promotional terms

Claim Submission

To initiate a claim, please provide:

  • The product for inspection
  • Proof of purchase (invoice)

All warranty claims are subject to full inspection to ensure they meet the conditions of coverage.

Preparing Your Product

To help us process your claim efficiently, please remove all non-essential accessories before sending your product, including:

  • Tires and tubes
  • Rim tape
  • Cassettes
  • Skewers
  • Sensors or computer magnets

We are not responsible for any accessories left on the product and reserves the right to remove them if required.

Shipping for Warranty Claims

Customers are responsible for:

  • Shipping the product to us
  • Any associated shipping or insurance costs

If a defect is confirmed, we will take care of the next steps accordingly.

Service & Responsibility

We are committed to resolving warranty claims as efficiently as possible.

To the extent permitted by applicable law, we are not responsible for:

  • Indirect or consequential losses
  • Loss of use, revenue, or anticipated benefits
  • Costs associated with alternative equipment
  • Third-party claims or property damage arising from product use

We are also not liable for delays in warranty service that may occur due to logistics, inspection, or external factors.

전체 세부 정보 보기